Connect & follow   

Our products

Rockford Fosgate - Punch 300 Watt 2-Channel Amplifier

Rockford Fosgate - Punch 300 Watt 2-Channel Amplifier

Discounts Apply !

Punch 300 Watt 2-Channel Amplifier

The Punch PBR300X2 uses our patented BRT (Boosted Rail Technology) for an ultra efficient design that does not use a switching power supply to generate its rated power. This allows the chassis design to be much smaller than traditional sized amplifiers. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. It is great for smaller stealth installations, as well as for motorcycles and recreational vehicles.

•  Variable 4-6 volt hi level DC offset voltage input turn-on control
•  Ultra compact chassis
•  High level inputs
•  MOSFET output stage
•  12dB/octave Butterworth crossover
•  1 Year Warranty

Rated Power (RMS Continuous Power)    100 Watts x 2 @ 4-Ohm
                                                                 150 Watts x 2 @ 2-Ohm
                                                                 300 Watts x 1 @ 4-Ohm Bridged
Dynamic Power (PVC/PowerCube®)    114 Watts x 2 @ 4-Ohm 
                                                              160 Watts x 2 @ 2-Ohm
                                                              387 Watts x 1 @ 4-Ohm Bridged
Total Power (Sum of Rated Power)    300 Watts 
Number of Channels    2
Bridgeable    Yes
CEA-2006 Compliant    
CEA-2006 Power Rating
                                     100W x 2 @ 4Ω
                                     ≤1.0% THD+N
Circuit Topology Class    Class BR
Speaker Wire Gauge    16 AWG
Power Wire Gauge    10 AWG
Max. Current Draw (13.8V Sinewave)    45 A
Average Current Draw (13.8V Music)    23 A
Recommended Fuse (not included)    50 A
Suggested Alternator    75 A
Operating Voltage    9-16 VDC
Crossover Controls    High-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth
                                  Low-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth
                                  All-Pass: Yes
Frequency Response    
20Hz - 20kHz +/-3dB
Input Sensitivity    150 mV - 11 V
Signal Input    High/Low Level Input: 4-Pin harness
                       Hi-Level Sensitivity: Variable DC offset sensitivity
Power Input Connector    Detachable Compression Terminal
Speaker Output Connector    4-Pin Harness
Heat Sink Type    Extruded Aluminum
Cooling    Convection
Visual Indicators    Power/Protect, BRT (Boost)
Efficiency (average)    68% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)    4-Ohm: <1.0% - 2-Ohm: <1.0%
Signal-to-Noise (CEA)    84 dB
Channel Separation    65 dB
Common Mode Rejection    62 dB
Damping Factor    >200
Tone Controls    
Optional Remote Punch EQ
Remote Controls    Optional PEQ provides 0dB to +18dB @ 45Hz
Dimensions (H x W x D)    
1.53 x 4.25 x 6.75 (in.) 3.90 x 10.8 x 17.2 (cm)
Shipping Weight    2.8 Lbs. (1.27 Kg.)

Product ID RF PBR300X2
Price: $279.99

Free Ground Shipping Via Fed Ex, UPS, or Postal Service (OUR CHOICE) Within the Continental United States for All Orders Over $99
 


PayPal—eBay's service to make fast, easy, and secure payments for your eBay purchases!
All Paypal Orders must be verified and confirmed