Rockford Fosgate - 2014 & Newer Harley-Davidson® Road Glide Ultra & Electra Glide Ultra Classic 6-Speaker & Amp Kit - HD14U-STAGE3

This 6-speaker, 400 watt high performance audio system is designed for select 2014+ Harley-Davidson® motorcycles (see compatibility) The included 6.5” fairing speakers, 6.5” TourPak speakers, and 6x9” baglid speakers are frequency-response tuned to overcome wind, exhaust, and road noise up to 75 MPH. The 400-watt amplifier features 2-channels for the fairing speakers and 2 channels for the rear TourPak and baglid speakers. The amplifier installation kit includes an external heat-sink, mounting brackets, speaker and power wiring with all necessary hardware. The included T-harness integrates into the electrical system for front/rear fading capability and features a loop-thru for an optional DSR1 digital signal processor (sold separately.)  *You will need to flash your factory radio to use this kit.

•  No drilling or cutting required
•  Kits bolt to factory attachment points
•  Direct connect wiring harnesses for Harley-Davidson® models
•  T-harness integration supports front/rear fader control (requires radio flash)
•  Includes amp output Y-adaptors for lower fairing and/or TourPak speakers
•  TM400X4ad Power Marine 400 Watt Class-ad 4-Channel Amplifier
•  TMS65 Power 6.5" Full Range Fairing/Tour Pak Speaker 2014+ Harley-Davidson
•  TMS69BL14 Power 6x9” speaker retrofit kit for factory Harley-Davidson® baglids (not for fiberglass models)
•  RFK-HD14 2014+ Harley-Davidson Road Glide & Street Glide Amplifier Wiring Kit
•  *NOTE: Requires factory Harley-Davidson® radio to be flashed
•  2 Year Warranty

Speaker Qty    6
Amplifier Type    External
Total Power    400 Watts
Grille/Trim Ring Included    Yes
Mounting Hardware    Yes
Included In The Box
(4) TMS65 Speakers
(2) 2015+ Road Glide Grilles
(2) 2014+ Street Glide Grilles
(2) 2014+ Tour-Pak Grilles
(1) TM400X4ad Amplifier
(1) RFK-HD14 Amp Mounting Kit
(2) TMS69 Speakers
(2) 6"x9” Speaker Grilles
(2) 6"x9" Basket Protectors
(2) 6"x9” Mounting Rings
(2) Baglid Cutting Templates
(5) Factory Amp Bypass Plugs
(1) DSR1 Loop-Thru Harness
(2) Amp Output Y-Adaptors
(2) Wiring Harness Kit
(1) Hardware Pack

Vehicle Compatibility
2014-current  Harley-Davidson  FLHTKSE  CVO Limited
2016-current  Harley-Davidson  FLHTKSE  CVO Ultra Limited
2015-current  Harley-Davidson  FLTRUSE  CVO Road Glide Ultra
2015-current  Harley-Davidson  FLTRU  Road Glide Ultra
2017-current  Harley-Davidson  FLHTKL  Electra Glide Ultra Limited Low
2014-current  Harley-Davidson  FLHTCU  Electra Glide Ultra Classic
2014-current  Harley-Davidson  FLHTK  Electra Glide Ultra Limited
*Requires factory Harley-Davidson® radio to be flashed
*Baglid Kit compatible only with ABS plastic lids. Not compatible with Fiberglass lids.
*Baglid Kit not compatible with H-D® Power Lock Kit
*Installation on CVO™ models are not plug-n-play and will require modification