J&M ROKKER SERIES AUDIO KIT W/200W RMS AMP & 6.58" FAIRING SPEAKERS FOR 1998-2013 HARLEY ROADGLIDE/ROADGLIDE ULTRA

Amplifier Output Power: 200w RMS total (100w x 2) into 2-ohms at 14.4vdc
Amplifier Class: Class D properly shielded against FM interference
External Dimensions: 6 ½ x 4 ¾ x 1 ¾
Speaker Size: 6.58” (in.) Diameter
Cone Construction: Black Glass-Fiber
Tweeter Type: PEI Dome High-Output
Frequency Response: 35-23kHz
Sensitivity: 91 db
Magnet Material: Lightweight Neodymium
Impedance: 2 Ohms
Maximum Power: 200 Watts
RMS Power: 130 Watts
Weather Resistant: Yes
Comparision Rating: ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate

Description

J&M's ROKKER Performance Series complete custom speaker/amp installation kit has been designed for the 1998-2013 Harley® RoadGlide or RoadGlide Ultra fairing.

ROKKER speakers are spec'd at 2 ohms impedance and 200 watts maximum input (130w RMS - 91db sensitivity), these speakers provide excellent on-highway performance. (1998-2005 RoadGlide fairing J&M speaker adapter plate kit # RRPA-RGSPA also recommended)

Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output PEI tweeters.

Top-quality speaker grills, adapter rings and bracket hardware are included for secure and clean mounting into the 98-13 Harley RoadGlide fairing.

Mounting hole pattern and spade electrical connections are exactly the same as the factory specification, this is a total plug-and-play no-modification solution complete with easy to follow installation instructions.

The new ROKKER 2-channel 200w amplifier has been design specifically for use in the 1998-2013 Harley® RoadGlide fairing with the Harley HK Radio, Harley RSI radio and Jensen, Aquatics or Fosgate replacement HD radios with direct RCA-RCA connections.

This is a full range class D amplifier and is spec’d at 100watts RMS per channel X2 channels, (200w total) driven continuous into a 2 ohm load @ 14.4vdc.

Amplifier mounts to the custom made L-bracket system, manufactured specifically for the RoadGlide fairing.

Custom made plug-n-play wiring harnesses/RCA-RCA direct cable adapters are included with this complete audio kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 6 ½ X 4 ¾“ X 1 ¾”.

ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate.