JMC ROKKER STAGE6 AUDIO KIT W/400W RMS AMP & 6.71” FAIRING SPEAKERS FOR 2014-2023 HARLEY STREETGLIDE/ULTRA/TRI-GLIDE

Amplifier Output Power: 400w RMS total (200w x 2) into 2-ohms at 14.4vdc
Amplifier Class: Class D properly shielded against FM interference
Manually Adjustable: Easily adjustable during installation with small screwdriver
External Dimensions: 7 ¼” x 4 ¾” x 1 ¾” (in.)
Mounting Options: Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing
Radio Compatibility: Amplifier is tuned for connection to the Harley GTS, 6.5GT, or 4.3 Std radio with Stock Harley Flash and is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14
Speaker Size: 6.71” (in.) Diameter
Cone Construction: Black Glass-Fiber
Tweeter: PEI Dome High-Output
Frequency Response: 30-23kHz
Sensitivity: 90 db
Magnet Material: Lightweight Neodymium
Impedance: 2 Ohms
Maximum Power: 300 Watts
RMS Power: 200 Watts
Mounting Depth: 2 7/8” (in.)
Weather Resistant: Yes
OEM Size Match: Yes
Comparision Rating: ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate

Description

The new ROKKER 2-channel 400w amplifier kit has been designed specifically for use in the 2014-2023 Harley® StreetGlide, Ultra or Tri-Glide fairing with the stock Harley 4.3 Std, 6.5GT or GTS touch-screen radio, and is tuned for the stock Harley flash, NO SPECIAL FLASH needed.

This new amplifier kit is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14

This is a full range class D amplifier and is spec’d at 200watts RMS per channel X2 channels, (400w total) driven continuous into a 2- or 4-ohm speaker load.

Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing.

Custom made plug-n-play JMC red-band wiring harnesses are included with this complete amplifier kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 7 ¼” x 4 ¾“ x 1 ¾”.

New ROKKER-2 XXR series 6.71" speakers are designed as exact size component/replacements for the stock 6.5" Harley fairing speakers as installed on the 2014-2023 Harley StreetGlide, Ultra, Ultra Ltd.

All new high-output PEI dome tweeter is mounted into the custom ROKKER2 grills.

Spec'd at 2 ohms impedance and 300 watts maximum input (200w RMS - 90db sensitivity).

Lightweight waterproof one-piece woven-fiber driver cone with super-rigid metal basket design.

High-density Neodymium magnet structure, specially coated to maintain flux-strength integrity even at extreme operating temperatures.

Mounting hole pattern and spade electrical connections are exactly the same as the factory specification.

Harley Radio Programming Note: If your Harley infotainment radio was previously flashed to a different configuration from stock, (i.e., BoomI or Boom II) instruct your dealer to re-flash the radio back to “” 4-Speakers, Upper-Fairing, Rear-Pods, No-Amp “” using the Harley or other brand digital technician, prior to the installation of this complete kit.