J&M ROKKER 400w 4-Ch Amp Kit 1998-2024 Harley RoadKing w/MAHS-BLU3C or B Speakers Installed

Peak Power Output: 860w Max – 215w x 4CH – 2-ohm load at 14.4vdc
RMS Output Power: 400w RMS - 100w x 4CH – 2-ohm load at 14.4vdc
Amplifier Class: New high-efficiency Class-D IC circuitry, (no cooling fans needed) properly shielded against FM/AM radio interference
Manually Adjustable: All controls easily adjustable with a small screwdriver should any changes need to be made during the installation
Marine Grade Protection: PCB is conformal coated for complete protection against water damage in the motorcycle or powersports environment
Power Supply: 12v Digital Switching – Very Low Amperage Draw Compared to Other Brands in this Power Range
Bluetooth Handlebar Control: Fully functional when connected to the JMC ROKKER Bluetooth powered handlebar speakers (ONLY) part#’s MHAS-BLU3C or B
Speaker Compatibility: Compatible with any 2, 3 or 4-ohm speakers with sufficient power rating
Mounting Features: Mounts to the Lazer-cut stainless steel bracket system, to provide solid and secure mounting inside the left saddlebag
External Dimensions: 8 ¼” x 5 ¼” x 1 ¾” (in.)
Comparision Rating: ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley or Fosgate

Description

This new JMC ROKKER® 400w fairing/rear speaker amplifier kit has been designed specifically for use on the 1998-2024 Harley RoadKing with hard saddlebags.

Kit includes custom made connection harnesses and they are 100% plug-n-play into the RoadKing’s electrical system, providing 4 separate channels of amplification at 100w RMS power per-channel into a 2-ohm speaker load.

Included wire harness connection points for speakers are the LOWER front fairing and the saddlebag lid speaker positions.

New high-efficiency Class-D IC circuitry, (no cooling fans needed) properly shielded against FM/AM radio interference.

Bluetooth controlled from the handlebar when connected to the JMC ROKKER Bluetooth powered handlebar speakers (ONLY) part#’s MHAS-BLU3C or B.

PCB is conformal coated for complete protection against water damage in the motorcycle or powersports riding environment.

This ROKKER amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system, compared to other brand amplifiers in this power range.

Amplifier mounts to the custom-made stainless-steel bracket system, to provide solid and secure mounting inside the left saddlebag position.

This new ROKKER series amplifier comes out of the box already dialed in for this specific custom speaker configuration, to provide maximum highway performance from your Harley/ROKKER audio system.

Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 8 ¼" X 5 ¼" x 1 ¾” (in.).