JMC ROKKER STAGE6 400W 2-CH AMP KIT FOR 2014-2023 HARLEY STREETGLIDE/ULTRA/TRIGLIDE

Amplifier Output Power: 400w RMS total (200w x 2) into 2-ohms at 14.4vdc
Amplifier Class: Class D properly shielded against FM interference
Manually Adjustable: Easily adjustable during installation with small screwdriver
External Dimensions: 7 ¼” x 4 ¾” x 1 ¾” (in.)
Mounting Options: Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing
Speaker Compatibility: Compatible with any 2- or 4-ohm speakers with sufficient power rating
Radio Compatibility: Amplifier is tuned for connection to the Harley GTS, 6.5GT, or 4.3 Std radio with Stock Harley Flash and is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14
Comparision Rating: ROKKER amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate

Description

The new ROKKER 2-channel 400w amplifier kit has been designed specifically for use in the 2014-2023 Harley® StreetGlide, Ultra or Tri-Glide fairing with the stock Harley 4.3 Std, 6.5GT or GTS touch-screen radio, and is tuned for the stock Harley flash, NO SPECIAL FLASH needed.

This new amplifier kit is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14

This is a full range class D amplifier and is spec’d at 200watts RMS per channel X2 channels, (400w total) driven continuous into a 2- or 4-ohm speaker load @ 14.4vdc, and is compatible with any 2- or 4-ohm speakers with sufficient power rating.

Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing.

Custom made plug-n-play JMC red-band wiring harnesses are included with this complete amplifier kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions. needed.

Amplifier itself measures 7 ¼” x 4 ¾“ x 1 ¾” (in.)

Harley Radio Programming Note: If your Harley infotainment radio was previously flashed to a different configuration from stock, (i.e., BoomI or Boom II) instruct your dealer to re-flash the radio back to “” 4-Speakers, Upper-Fairing, Rear-Pods, No-Amp “” using the Harley or other brand digital technician, prior to the installation of this complete kit.