JMC ROKKER STAGE6 1000W 4-CH AMP KIT FOR 2024 HARLEY ROADGLIDE - **SPECIAL MOUNTING NOTE**

Peak Power Output: 2040w Peak Power – 510w x 4CH – 2-ohm load at 14.4vdc
RMS Output Power: 920w RMS - 230w x 4CH - 2-ohm load at 14.4vdc
Amplifier Class: New high-efficiency Class-D IC circuitry, (no cooling fans needed) properly shielded against FM/AM radio interference
Manually Adjustable: All controls easily adjustable with a small screwdriver should any changes need to be made during the installation
Marine Grade Protection: PCB is conformal coated for complete protection against water damage in the motorcycle or powersports environment
Power Supply: 12v Digital Switching – Very Low Amperage Draw Compared to Other Brands in this Power Range
Radio Compatibility: Compatible with the stock Harley Radio/200w amp, NO special radio flashes or adjustments are needed. Includes parts needed to reduce the physical size of the stock Harley amp.
Speaker Compatibility: Compatible with any 2, 3 or 4-ohm speakers including stock Harley
Mounting Options: Mounts into the in-fairing cradle with JMC bracket and mounting hardware
External Dimensions: 8 ¼” x 5 ¼” x 1 ¾” (in.)
Comparision Rating: ROKKER speaker and amplifier kits provide lower distortion levels, better bass response and superior highway performance, compared to stock Harley, Fosgate or Hertz

Description

This new JMC ROKKER® 1000XXR fairing/rear speaker amplifier kit has been designed specifically for use on the 2024 Harley RoadGlide.

Kit includes custom made connection harnesses, and is 100% plug-n-play into the RoadGlide’s electrical system, providing 4-channels of amplification at 230w RMS power per-channel x4 (920w RMS total) into a 2-ohm speaker load.

New high-efficiency Class-D IC circuitry, (no cooling fans needed) properly shielded against FM/AM radio interference.

PCB is conformal coated for complete protection against water damage in the motorcycle or powersports riding environment.

This ROKKER amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system, compared to other brand amplifiers in this power range.

Compatible with the stock Harley radio/200w amp, NO special radio flashes or adjustments are needed.

The stock Harley amp circuit assembly will need to be removed from the metal housing, heatsinks added, and then shrink-sealed for weatherproofing, before mounting to the top of the ROKKER amplifier.

Amplifier mounts into the in-fairing cradle with JMC bracket and mounting hardware.

This new ROKKER series amplifier comes out of the box already dialed in for this specific stock or custom speaker configuration, to provide lower distortion levels, better bass response and superior highway performance, compared to stock Harley, Fosgate or Hertz.

Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 8 ¼” x 5 ¼“ x 1 ¾” (in.)